|Pool Table Supplies|
The Mini Mover pool table mover adjusts to fit snugly onto the side of a coin op or bar style pool table. Center the pool table mini mover with the center pocket and then tip the pool table over onto the Mini-Mover and easily roll the pool table wherever you desire. Larger center wheels let you turn around tight corners and the height offset lets you roll the pool table mover onto pickup lift gates easily. Over rough terrain optional nylon straps can be used with the pool table Mini Mover for extra safety. Will not work with home style 3 piece slate tables.
Both the dolly and the pool table can fit onto a extended pickup liftgate.
Designed for transporting from Location to Location. Makes transporting easier and safer!
Will fit and move virtually all billiard and air hockey games, even those with trestle legs.
Adjusts easily for different widths and lengths. Specially angled to balance load over wheels.
Two of these dollies will fit side by side in a pickup truck. Strong Clamping action holds securely in place.
Lugs for use with Nylon Straps are provided for extra security if desired.
Special composition wheels are kind to floors.
Dolly is rated at 1000 Lb. test, Approximate Dimensions: 35"L x 21" (varies), 12"H. Built tough in the USA.
Available for Dynamo, Valley or Shelti.
Position the Mini-Mover at the middle of the table and engage the clamps. The clamps secure the Mini-Mover to the table. You will not need to over tighten the clamps, they should only be snug enough so when you tip the table over later, the mover stays attached to the table. The areas of the Mini-Mover that come in contact with the table are padded to protect the table.
Tip the table up onto the Mini-Mover. One man can easily tip the table up onto the Mini-Mover. (For best results, remove leg levelers before tipping.)
The Mini-Mover rides on six wheels. The two middle wheels are larger than the four outside wheels. This makes the Mini-Mover very maneuverable. You can actually spin the Mini-Mover and the pool table around on the two middle wheels.
To start, tilt the Mini-Mover and the pool table onto the two back and the two middle wheels. This will lower the back end and raise the front end to ease rolling of the Mini-Mover and table up onto the lift gate.
Now roll the Mini-Mover and pool table onto the lift gate. As you can see the front and middle sets of wheels are up on the lift gate.
As the lift gate is raised, you can see the weight is being lifted by the lift gate. Not the operator. The operator only has to balance the load, he does not have to lift. This feature greatly reduces back injuries.
Finally, with the lift gate in the raised position, the Mini-Mover and pool table roll right into the truck. If the legs of the table are removed, two Mini-Movers with tables will easily fit side by side in a pick-up truck.
Over rough terrain you can secure the pool table to the Mini-Mover by using nylon straps (straps not included). The Mini-Mover has built-in, conveniently located strap anchors.
|Site Map||Pool Table Maintenance Demystified Blog||Order Information||Contact Us||About Us||Privacy Statement|
| Lakeside Electronics & Amusement Co.
310 Covington St.
P.O. Box 176
Madisonville, Louisiana 70447
Local(985)845-7146 Voice/Fax (985)845-0570 firstname.lastname@example.org