Dynamo Coin Operated Pool Table Parts - Accessories
Dynamo coin operated pool table parts and accessories for sale. Our complete line of Dynamo parts includes rubber rail cushions, rail assemblies, coin doors, coin mechanisms, legs, feet, balls, cueballs and a host of other parts and accessories for coin op Dynamo pool tables.
Quality replacement pool table rail assemblies and refelting kits for Dynamo coin operated pool tables. These dynamo rail assemblies replace your current worn out and damaged rail cushions and are available in several sizes. These are exact duplicates of the original wood rails complete with new premium rubber cushions glued on and ready for covering or you can get them precovered in your choice of cloth for fast and easy bolt on installation. They are made from #1 clear poplar wood, premium pink K-55 rubber cushions, premium sawtooth style T-Nuts and smooth cushion facings that are glued and stapled. Each cushion set is made with pride in the USA and are optionally available precovered with felt and with a matching bed felt for a complete recovering kit. Felt is available in many color choices that can be selected below.
Replacement rail mounting bolt for coin op pool tables. Available individually or in sets of 18. Save yourself some grief by replacing your old, cross threaded bolts with these new quality bolts. Standard 1/4 - 20 size.
Sawtooth-style T-nuts for use with pool table rails. You won't find these thicker-gauge ultra-durable T-nuts in your local hardware store; these are the real deal and hold tight! 1/4 - 20 (standard) for all pool table rail brands except Global.
Set of 18 threaded T-Nuts used on wood rail assemblies using self threading interior style t-nuts. 1/4 - 20 (standard) for all pool table rail brands except Global.
Replacement rubber rail facings for all billiards. Set of 12 replaces all ends on rubber cushions. Just cut for a precise fit.
Extra thick 3/16" replacement rubber rail facings for all billiards. Highest quality die cut over size facings used to close up the pocket size on pool tables that need the playing difficulty increased as in coin operated tables that have enlarged pocket holes. Closes pockets up to 3/16" inch on each side. Make your home coin operated table play like a standard table with these extra thick cushion ends. Set of 12 replaces all ends on rubber cushions. Just cut for a precise fit.
Set of 6 pocket liners. These pocket liners are 4" high.
Set of 6 red pool table pocket liners. These red plastic pocket liners are 4" high.
Set of 6 gulley boots. These line the bottom of each pocket.
Set of 12 pocket nails for use with pool table pockets. These pocket nails are exact replacement for Valley pocket nails at a reduced price. Size is 7/8" L x 1/8" D.
Set of 8 pocket buttons for use with new Valley and Dynamo tables. These push-in nylon buttons are used to hold pockets and are available in standard 1/4" size.
These new aluminum trim rails can make your Dynamo table look new again. These trim sets are made from extruded anodized aluminum and are very easy to install. Each set includes 4 pieces of trim and matching trim screws and fit Dynamo coin operated tables. Available for 7,8, and 9 foot tables and in aluminum or gold colors.
Bag of 100 trim screws used for attaching aluminum trim rails.
Replacement cue ball return trim ring for Dynamo coin op pool tables. Made of heavy grade black plastic. Replaces lost or broken trim rings.
Heavy black replacement coin op pool table leg for all Dynamo, Valley and other coin operated pool tables. New style leg used on Valley-Dynamo tables currently. Adjustable foot is extra and sold below. 4 bolt hole mounting.
These 5/16" - 18 thread, slotted washer head leg bolts are for attaching fiberglass legs to a pool table. Each leg requires 4 of these; available individually or by the set of 16 bolts. For use with Valley, Dynamo and other coin operated tables.
Jumbo heavy duty leg leveler is 4 3/4" in diameter and for use with pool table legs including those sold above. These are threaded into the 1/2" - 13 thread leg leveler t-nuts found on the underside of fiberglass pool table legs or order below.
Set of four 6" diameter rubber leg shims are 1/16" thick and used to level tables and protect floors.
Leg leveler T nuts. Available individually or by the set of 4. Heavy duty solid steel, 1/2" - 13 thread, leg leveler t-nuts. These are mounted into the underside of fiberglass pool table legs so as to provide a thread for leg levelers. Mates with leveler feet above.
Coin strip keeper, helps keep track of players turn on coin op pool tables. Prevents fighting over whose turn is next.
Ball drop motor cable and bracket assembly for use on the Dynamo Pro Plus, Sedona DBA. Includes 8 1/2" long cable and brackets to attach it to the motor. Reference 990205040
New coin door for Dynamo, Valley and other coin op pool tables. Ready to use just install your coin mechanism and lock. Black color only. Available in three sizes 8 7/8"W x 7"H, 9 3/4"W x 7"H and 10 3/16"W x 8 1/4"H.
New coin door vallance for Dynamo/Valley and othe coin op pool tables. This is the door header that mounts directly above the coin door that gets damaged when the pool table is broken into. Black color only.
5 inch deep plastic cash box for Dynamo tables that use push chute coin mechs. This includes all Dynamo pool tables (DBA models still have a push chute) and older-model Dynamo Hockey tables. Not for Dynamo hockey tables with roll-down coin doors.
New coin door for Dynamo pool tables and air hockey tables using the plastic doors and frame assemblies. Measures 8 15/16" x 7 1/2". Ready to use just install your coin mechanism and lock.
New plastic coin door frame assembly for Dynamo pool tables and air hockey tables using the plastic coin doors.
New Dynamo ball clean out door in black color. Measures 6" x 4". Ready to use just install your lock.
New #106 key for Dynamo pool table. Key only for the standard issue lock on many recent push chute only Dynamo pool tables. Most, but not all, Dynamo ball view, clean out and trap doors are keyed with this lock at the factory.
We make no guarantees that this key will fit the lock on your door, not all tables left the factory with this lock, and nothing stops someone from changing their tables locks after leaving the factory. FINAL SALE - NO REFUNDS OR RETURNS on keys.
New #106 lock and key for Dynamo pool tables. Was the standard issue lock and key used on many recent push chute only Dynamo pool tables. Most, but not all, Dynamo ball view, clean out and trap doors are keyed with this lock at the factory.
Replacement 7/8 and 1 1/8 inch long high security cam lock for most all arcade games. These locks come complete with key and straight cam. 1 1/8" lock is used on most ball doors and clean out doors. 7/8" is used on most coin doors.
Lock plate for standard cam locks used in most arcade games. These plates keep locks securely mounted and prevents them from turning.
Replacement Dynamo coin op pool table ball view door clear acrylic window 4 1/2 x 32 7/8 inches.
Replacement Dynamo coin op pool table ball trap tray. 34"L x 6 1/2"W.
Ball stop used in the ball trap of all current Valley and Dynamo coin and DBA tables.
Replacement coin mechanism extensions for Dynamo pool tables. For all tables using long 6 1/2" extensions.
Ball tray return spring for all coin operated pool tables. Fits Valley, Great American, Dynamo and others.
Spring actuator for coin counter, attaches to push chute and counter arm. Fits Valley and Dynamo pool tables.
Hinge bar/tripper rod assembly for Dynamo coin operated pool tables. Tripper rod fits all Dynamo Pool tables, both door-mount and internal coin counter. Reference #800204001
Wooden hinge pivot block set holds and mounts the ball dump arm on all Valley coin op pool tables. Replaces broken or worn pivot blocks.
Shoulder bolt for all coin operated pool tables. This specially made bolt is used on each end of the ball dump tray. Replace worn or missing bolts with these replacements.
Ball mat is made out of 3/32" thick 60 durometer neoprene that is tougher than factory originals and will add longevity to your pool table's ball-dump mechanism. Will not dent, crumble, or crack.
Lubriplate multi purpose low temperature grease is a lithium based lubricant made for a wide range of cold temperature applications. Provides excellent corrosion and oxidation resistance and wide compatiblity with metals, plastic and rubber. 1.75 oz tube.
New ESD vertical 4 coin push chute coin mechanisms. Can be adjusted to accept .25 to $1.00. Available preset on 50 cents , 75 cents or $1.00. Select below. Used on video games, pool tables, vending machines and arcade games.
Set of 4 coin mechanism mounting screws for the ESD vertical style coin mechanisms.
Replacement coin inserts for ESD vertical coin mechanisms. Use to reprice coin mechs. Available in .25 cent or blank inserts.
Replacement pricing decals for ESD vertical 4, 5 and 8 coin mechanisms. Available in .50, .75 cent, $1.00, $1.25 and $2.00.
Replacement coin mechanism spring for ESD vertical coin mechanisms. Uses two for each coin mech.
Replacement return springs bracket for ESD vertical 4 coin mechanisms.
Replacement coin mech leaf spring for ESD vertical coin mechanisms.
Chrome metal beverage rack. Holds three drinks. Easy screw in placement (screws not included). Can be mounted on game, cabinet or wall.